https://live.paloaltonetworks.com/t5/general-topics/sccm-clients-to-dp-communication/m-p/471890#M103147 <P>you need to enable multicast in the virtual router and set the interfaces that will participate</P> <P>&nbsp;</P> <P>you can then create a rule with destination zone set to multicast, and the port range you need to have open. (you'll see if there's a known app-ID for the traffic soon after it's set up so you can adopt app-id instead of 'any')</P> Thu, 10 Mar 2022 09:54:42 GMT reaper 2022-03-10T09:54:42Z https://live.paloaltonetworks.com/t5/general-topics/sccm-clients-to-dp-communication/m-p/471153#M103072 <P>Following is the one of prerequisites to set up a SCCM infra, is there any existing app-id that&nbsp; can be used to cover this port&nbsp; requirement. Will it need an explicit rule based on port/service range only&nbsp; or any changes needed in&nbsp; VR (IP multicast perspective) as well.&nbsp;&nbsp;</P><P>Prerequisite :Client --&gt; Distribution point configured for multicast, both standard and pull<BR />Description UDP , Multicast protocol : 63000-64000.</P><P>Thanks in advance...</P> Tue, 08 Mar 2022 07:10:25 GMT https://live.paloaltonetworks.com/t5/general-topics/sccm-clients-to-dp-communication/m-p/471153#M103072 Dip741 2022-03-08T07:10:25Z https://live.paloaltonetworks.com/t5/general-topics/sccm-clients-to-dp-communication/m-p/471890#M103147 <P>you need to enable multicast in the virtual router and set the interfaces that will participate</P> <P>&nbsp;</P> <P>you can then create a rule with destination zone set to multicast, and the port range you need to have open. (you'll see if there's a known app-ID for the traffic soon after it's set up so you can adopt app-id instead of 'any')</P> Thu, 10 Mar 2022 09:54:42 GMT https://live.paloaltonetworks.com/t5/general-topics/sccm-clients-to-dp-communication/m-p/471890#M103147 reaper 2022-03-10T09:54:42Z