PA-220 is not allowing inbound traffic

DJ_Palo — Tue, 05 Apr 2022 11:00:04 GMT

HI PA Community! I have a very odd issue. My Palo will not allow any inbound connection. I was setting up GP and wondered why I can't hit the portal. Then realized I can't even PING the public IP. I am using a dynamic PPoE connection to my ISP. I created a special rule to allow my testing external computer and can see the rules being hit. I can't even see my testing IP in the logs and yes, I enabled logging for it. I can see the bad IPs getting blocked in the logs. When doing a pcap, I can see the external interface is not responding to PING request (no response found). I enabled PING on the management profile, allowed the rules. I removed the zone protection. I removed threat protection. I'm at a loss as I've tried everything!

Re: PA-220 is not allowing inbound traffic

DJ_Palo — Tue, 05 Apr 2022 11:01:17 GMT

In addition - Even internally, I cannot PING the Public IP. The Bell ISP says they are not blocking anything.

topic PA-220 is not allowing inbound traffic in General Topics

PA-220 is not allowing inbound traffic

Re: PA-220 is not allowing inbound traffic