topic Re: how to Revert configuration by cli - pa 200 v 9.0.14 in General Topics

how to Revert configuration by cli - pa 200 v 9.0.14

MAerre — Thu, 12 May 2022 10:37:38 GMT

Hi Guys,

we have a problem on a HA pair, the secondary firewall is no longer accessible via either GUI or CLI.
We can only connect via console, to restore one of the saved and working configurations, is it necessary to do only these commands?

> configure

# load config

+ key key

> from Filename

> last-saved Last saved configuration

> partial partial config loading

> version Version

# commit

i can't find the correct guide other than the one that refers only to the gui.

thanks for any tip

Re: how to Revert configuration by cli - pa 200 v 9.0.14

OtakarKlier — Thu, 12 May 2022 16:35:33 GMT

Hello,

Yes it is required. You have to enter configuration mode and then load the config version you would like to revert to. Once that is completed you would commit the changes.

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Cm9uCAC

Regards,

Re: how to Revert configuration by cli - pa 200 v 9.0.14

MAerre — Mon, 16 May 2022 14:03:26 GMT

hi @OtakarKlier ,

i did the activity this morning and it worked.

tahnk you so much for the hepl!