Interfaces in power-down state

NickVardy — Thu, 19 May 2022 09:39:30 GMT

Hi all...I have a Palo Alto Active/Active pair and the HA3 link between them is down. Will PANOS then power-down all other physical interfaces when the HA3 link is down. Just looking for confirmation that this is expected behaviour or whether I have something more serious happening to this 3260. Any advise would be greatly appreciated

name id speed/duplex/state mac address
--------------------------------------------------------------------------------
ethernet1/1 64 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:40
ethernet1/2 65 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:41
ethernet1/3 66 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:42
ethernet1/4 67 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:43
ethernet1/5 68 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:44
ethernet1/13 76 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:4c
ethernet1/14 77 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:4d
ethernet1/15 78 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:4e
ethernet1/16 79 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:4f
ethernet1/17 80 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:50
ethernet1/21 84 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:54
ethernet1/22 85 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:55
ethernet1/23 86 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:56
ha1-a 5 1000/full/up 08:66:1f:04:cf:92
ha1-b 7 ukn/ukn/down(autoneg) 8c:36:7a:b1:9d:07
vlan 1 [n/a]/[n/a]/up 8c:36:7a:b1:9d:01
loopback 3 [n/a]/[n/a]/up 8c:36:7a:b1:9d:03
tunnel 4 [n/a]/[n/a]/up 8c:36:7a:b1:9d:04
hsci 8 ukn/ukn/down(autoneg) 8c:36:7a:b1:9d:08

Re: Interfaces in power-down state

S.Cantwell — Fri, 20 May 2022 01:55:15 GMT

I do not believe it is expected behavior to admin down all interfaces because the HA3 link going down. Not sure why you would see a "power down" vs an "admin down" for interfaces, so further investigation is warranted.

topic Interfaces in power-down state in General Topics

Interfaces in power-down state

Re: Interfaces in power-down state