topic Re: HA Link Monitoring. in General Topics

HA Link Monitoring.

murali438 — Mon, 18 Jul 2022 06:59:51 GMT

Is there any pre-requisite to keep the interface speed and duplex to auto , auto if we are using them in HA Link Monitoring?

During our HA Test our PA interfaces are kept in duplex auto , speed 1000 setting , we have shutdown the switch interface , PA has detected that that interface is down ( forced down) but it's not triggering the failover , when we set the speed to auto ..it has triggered the failover.

Re: HA Link Monitoring.

OtakarKlier — Mon, 18 Jul 2022 20:09:54 GMT

Hello,

Not sure if its a requirement, however I recommend to keep it auto/auto unless there is a dire need not to (i.e. an ISP link that is hard set).

Regards,

Re: HA Link Monitoring.

murali438 — Tue, 19 Jul 2022 02:52:17 GMT

Thank you for your kind response, it would be nice if I can find an official document. I have researched a bit but nowhere does it mentions about speed and duplex settings.

Re: HA Link Monitoring.

OtakarKlier — Tue, 19 Jul 2022 16:00:09 GMT

Hello,

Might want to reach out to support to see if they have anything.

Regards,