topic Getting validation error when pushing changes from Panorama to firewall in General Topics

Getting validation error when pushing changes from Panorama to firewall

Kathiravan_R — Wed, 27 Jul 2022 18:17:51 GMT

We are trying to push device group configuration to the managed firewalls but validation itself failing.

It throws the error as application status -> rockwell-factorytalk-viewpoint 'rockwell-factorytalk-viewpoint' is already in use.

Anyone experience the similar issue?

Any suggestions and help are highly appreciated

Re: Getting validation error when pushing changes from Panorama to firewall

BPry — Fri, 29 Jul 2022 02:54:52 GMT

@Kathiravan_R,

If you export the configuration and look at the XML do you see any additional reference to the listed application in the error?

Re: Getting validation error when pushing changes from Panorama to firewall

YEmreSeven — Fri, 29 Jul 2022 08:12:21 GMT

Hi, firstly, make sure Panorama and firewall's dynamic updates are up to date and the same version. Maybe it could be overrided application or maybe related with duplicated application-tag. Did you see any differance between firewall and Panorama?

Re: Getting validation error when pushing changes from Panorama to firewall

NetworkEnginear — Thu, 30 May 2024 21:45:24 GMT

Since I found this post at the top of Google's results, I want to add that I found the solution for this issue in the following Knowledgebase content:

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA14u000000sZ6WCAU

In my situation, I had several hundred apps to enable on the Panorama. Once I enabled the apps, I could push changes to my firewalls. Make sure that if you have dynamic updates scheduled for automatic installation then you should set them to be enabled by default on the Panorama.