System halts after login - using PA-VM v 10.0.6 eval hosted on ESXi 5.5

JKerouac — Fri, 04 Nov 2022 18:01:56 GMT

I have installed the VM and on boot up I can log in with the default user/password admin/admin but my system then crashes shortly after that.

I unchecked time sync

I added these to the config

Any ideas?

Re: System halts after login - using PA-VM v 10.0.6 eval hosted on ESXi 5.5

JayGolf — Tue, 08 Nov 2022 15:44:49 GMT

Hi @JKerouac ,

Can you try factory resetting your box? Then, once reset please try the following:

1- Disable the time on the Vmware

2- Go to VM host directory and add below lines to the vmx file, to completely disable the time sync

time.synchronize.continue = "FALSE"
time.synchronize.restore = "FALSE"
time.synchronize.resume.disk = "FALSE"
time.synchronize.shrink = "FALSE"
time.synchronize.tools.startup = "FALSE"

3- Start the VM from : Power -> Power on to Firmware

4- from BIOS, change date to 01/01/2021

5- Save and Exit from BIOS

6- VM will come up and will not power off anymore, you can set NTP on the PA VM to have the correct time.

7- If you shutdown the VM and want to restart it again, repeat from step 3.

topic Re: System halts after login - using PA-VM v 10.0.6 eval hosted on ESXi 5.5 in General Topics

System halts after login - using PA-VM v 10.0.6 eval hosted on ESXi 5.5

Re: System halts after login - using PA-VM v 10.0.6 eval hosted on ESXi 5.5