topic Re: routed-config-p2-failed in General Topics

routed-config-p2-failed

Sujanya — Fri, 13 Jan 2023 10:37:36 GMT

Hi All,

I am trying to add new interface to the ospf and pushing the configuration from Panorama to firewall, But I am getting the below error while commiting "client routed phase 2 failure", Commit on secondary firewall is succeeding. Issue is only on Primary firewall.

When I checked the logs in Palo-Alto firewall, I can see the below:
routed-config-p2-failed : 'Route daemon configuration load phase-2 failed.

Tried doing the below KEDB, but no help. Can anybody suggest on this.
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Cmk2CAC

Re: routed-config-p2-failed

aleksandar.astardzhiev — Mon, 16 Jan 2023 15:31:40 GMT

Hi @Sujanya ,

OSPF config is part of network configuration, managed with Panorama template. By default if there is local configuration overlapping with config pushed with Panorama template, FW will prefer the local config.

Can you confirm that your virtual-router config on the firewall is the config pushed from Panorama and not overridden? Connect to the problematic FW got to Network -> Virtual-Router and check if you see the green gear next to the VR for which you are trying to push the OSPF update