topic Re: Only partial of template got pushed to the firewall. in General Topics

Only partial of template got pushed to the firewall.

tinhnho — Thu, 02 Mar 2023 01:33:26 GMT

Hi Guys,

I have a template in Paranoma and I pushed it down to a firewall, the firewall could only get 80% of the template. The Panorama didn't complain as there were no error messages after the push.

The firewall is currently missing interfaces' settings and virtual router settings that I have set up on the template. The Policies and Objects got into the firewall just fine. Any idea the network settings didn't get pushed down to the firewall?

Thanks.

Re: Only partial of template got pushed to the firewall.

TomYoung — Thu, 02 Mar 2023 01:49:10 GMT

Hi @tinhnho ,

Is there a configuration already on the interfaces and virtual routers? If so, Panorama will not overwrite it unless you select Force Template Values. If you are not on site, enable Automated Commit Recovery if you change the network config. In that way, the NGFW will revert the changes if it loses connectivity to Panorama.

Thanks,

Tom

Re: Only partial of template got pushed to the firewall.

tinhnho — Thu, 02 Mar 2023 02:06:15 GMT

There was one or two configurations of interfaces and virtual router there before the push I think. Where do I find 'Force Template Values' in Panorama? Yea, i have 'Automated Commit Recovery' enabled.

Re: Only partial of template got pushed to the firewall.

TomYoung — Thu, 02 Mar 2023 02:11:21 GMT

Hi @tinhnho ,

Click on Edit Selections when you Push to Devices. You will see the check box on the lower right.

Thanks,

Tom

Re: Only partial of template got pushed to the firewall.

tinhnho — Thu, 02 Mar 2023 02:22:45 GMT

Found it!. I pushed and it failed as it reverted. Should I uncheck 'Automated Commit Recovery' and 'push to Devices' it again?

Re: Only partial of template got pushed to the firewall.

TomYoung — Thu, 02 Mar 2023 02:33:28 GMT

Hi @tinhnho ,

If you do that you may very likely have to drive on site to fix the issue. Since it reverted, you don't know what exactly broke, and you may lose all access. Best to be on site.

Thanks,

Tom

Re: Only partial of template got pushed to the firewall.

tinhnho — Thu, 02 Mar 2023 02:45:59 GMT

I found it, it reverted because it was using different mgmt ip. I've modified the template with a working mgmt ip address and push it again. It works now. Thanks.