topic Re: Multiple issues on Dynamic Updates PA-220 in General Topics

Multiple issues on Dynamic Updates PA-220

AbrahamAG — Fri, 31 Mar 2023 17:56:15 GMT

Hi Palo Alto Community Team,

I'm facing Multiple issues on Dynamic Updates PA-220, the thing is, in our company we have a PA-220 available and with active Premium Support license for all 2023, this FW was restored using factory reset process and get back to PAN-OS 8.0.7 and updated following the order

8.0.7 > 8.0.19-h1

The FW was updated but now we're receiving an error message when try to update from 8.0.19-h1 to 8.1.0, apparently issue comes on the Dynamic Updates on the FW that stop appearing for 8.0 PAN-OS Version since August 2022, in this case I try to do it manually from the

PA CSP -> Updates > Dynamic Updates

But all updates for all categories are from this year 2023, I download and upload manually on the FW the

panupv2-all-apps-8687-7932 dated on March 17, 2023

But when is loading FW CPU goes over 100% and get an error, although the error when go to

Dynamic Updates > Install From File > Package Type > Apps And Threats > panupv2-all-apps-8687-7932

The file appears to be available but when install shows another error.

My question here would be,

1.- ¿Is there a Dynamic Updats Library previous versions of Dynamic updates for previous PAN-OS Version can be downloaded?

2.- ¿Is there any way, using console or WebGui to load directly de PAN-OS 9.1 or higher in order to be able to upgrade the Firewall with a Factory reset ?

Thanks in advance for your answers

Re: Multiple issues on Dynamic Updates PA-220

OtakarKlier — Fri, 31 Mar 2023 18:19:18 GMT

Hello,

Make sure your management interface can get to the internet without any decryption or inspection policies. Then go to Device->Dynamic Updates. At the bottom, click 'Check Now'. this will have the palo alto reach out to the internet services and grab the latest versions. Once you download and install the App/Threats one, click the check now again and download and install the antivirus ones.

Also you can grab a secure config from https://live.paloaltonetworks.com/t5/general-articles/secure-day-one-configuration-not-for-the-faint-of-heart/ta-p/435501 .

Regards,

Re: Multiple issues on Dynamic Updates PA-220

AbrahamAG — Sat, 01 Apr 2023 00:10:20 GMT

Hi @OtakarKlier , thanks for your answer.

Yes, I have completed the configuration of the device in order to reach internet with the DNS servers, in this case I have not generated any rule yet, only have the MGMT configuration to be accessed remotely, run a couple CLI tests in order to double check.

Using CLI with MGMT IP address as a source as well

Also I was able to obtain a Dynamic Update from other sources

panupv2-all-contents-8424-6791

Loaded but when try to install it obtain a differente error, looks like updates are also linked to license as well.

In this case Is it possible to install the PAN-OS from a USB and using some recovery or factory mode?, I think that would be the fastest solution

Re: Multiple issues on Dynamic Updates PA-220

OtakarKlier — Tue, 04 Apr 2023 21:29:43 GMT

Hello,

I dont think you need to factory reset it. You need the dynamic updates regardless. I would check the traffic in the logs to see why/if its getting blocked etc.

Regards,