how configure a vlan with dhcp

Fipaterm — Mon, 10 Apr 2023 16:01:35 GMT

I have configured my vlan in different ways with subinterfaces however I connect my switch or my laptop to the port and it doesn't work.

steps i followed:
1. Create subinterfaces and assign a segment to it.
2. Add these subinterfaces to the virtual router.
3. add dhcp to the subinterfaces.
4. create firewall rule for internet outbound from zone and vlan segment.

It looks something like this: https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClRkCAK

However, when I put it on my laptop, the vlan on the ethernet port does not work.

Re: how configure a vlan with dhcp

BPry — Mon, 10 Apr 2023 17:13:26 GMT

@Fipaterm,

Are you attempting to plug the laptop directly into the PAN device? Assuming that you are, you likely don't have the laptop configured for VLAN tagging and therefore what you have configured isn't going to work. You'll need to configure the device to tag traffic properly, or utilize a switch with a proper trunk configuration and break out the access ports as required on the switch.

topic how configure a vlan with dhcp in General Topics

how configure a vlan with dhcp

Re: how configure a vlan with dhcp