topic Re: Push is grayed out in General Topics

Push is grayed out

kevinospf — Sat, 09 Sep 2023 15:08:02 GMT

Hi Login Banner and System Log are created and commited in Panorama. and then click on Push button on top right corner. I got the below window. Why the Bush is grayed out? Is there something needed to completed before the Push? Thank you

Re: Push is grayed out

TomYoung — Sat, 09 Sep 2023 18:27:26 GMT

Hi @kevinospf ,

There is nothing in the Push Scope which means there is no config to push to any devices.

Thanks,

Tom

Re: Push is grayed out

Raido_Rattameister — Sun, 10 Sep 2023 00:32:03 GMT

If you have made changes and Push Scope is empty then just give Panorama some time and it will fill it up.

Re: Push is grayed out

Alin.Scarlat — Sun, 10 Sep 2023 08:31:08 GMT

Hello @kevinospf ,

The push being greyed out it also depending on what type of configuration you have changed. For example if the Loin Banner was the Panorama one, a simple commit will suffice since the changes only affects the Panorama device and no other firewall.

If, for example, you've changed some settings in the Template section (Network/Device) like you have highlighted in the background of your screenshot, there are a couple of possibilities for the Push option to be greyed out:

Depending on the load of Panorama it can take a little bit more time for the commit to finish and for the push button to be active (like @Raido_Rattameister suggested) because maybe the commit didn't finished or internal Panorama processes, post-commit didn't finish.
Other admin had already pushed your commit changes, which can be seen in the Task window
Your user does not have access to push changes (based on your admin roles)
Template stack has no firewall assigned.
Firewalls are not reachable by Panorama (connected).

Is it possible to validate the above list and, in case it's none of the above, to present some more details?

I hope this helps.

Re: Push is grayed out

kevinospf — Mon, 11 Sep 2023 16:39:12 GMT

Thanks all for your reply! Looks like template alone cannot be pushed. and it need stack together with template. Is this correct?

Re: Push is grayed out

Alin.Scarlat — Mon, 11 Sep 2023 16:44:50 GMT

Hello @kevinospf,

A template is associated (usually) with a template stack. You then associate the firewalls to the template stack. Eventually when you push the settings it's the template stack settings that have the options inherited from the templates.

If the modified template is not added to any template stack then there's no push available since Panorama will not know where to push that template.

I hope it helps.

Re: Push is grayed out

TomYoung — Mon, 11 Sep 2023 16:47:59 GMT

Hi @kevinospf ,

Nothing will be pushed from a template or template stack unless you have a device associated with it. You can only associated devices with template stacks.

Thanks,

Tom