https://live.paloaltonetworks.com/t5/general-topics/detect-unknowed-device/m-p/558504#M113294 <P>There is a functioning access point TP-Link EAP225.<BR />Cannot be managed from connected devices.<BR />We know MAC Address because present on a label.<BR />Is on a unknowed subnet.<BR />But this device use gateway with Palo Alto.<BR />We don't know IP (we have try all usal IPs).<BR />We have try some porscan, verify with Wireshark but without result.<BR />I have try tu access to Paolo Alto to verify arp table (also via ssh) but arp command is not present.<BR />Howto verify if MAC address (and IP) is present?<BR />Other ideas?</P> Tue, 19 Sep 2023 08:04:22 GMT paoloholzl 2023-09-19T08:04:22Z https://live.paloaltonetworks.com/t5/general-topics/detect-unknowed-device/m-p/558504#M113294 <P>There is a functioning access point TP-Link EAP225.<BR />Cannot be managed from connected devices.<BR />We know MAC Address because present on a label.<BR />Is on a unknowed subnet.<BR />But this device use gateway with Palo Alto.<BR />We don't know IP (we have try all usal IPs).<BR />We have try some porscan, verify with Wireshark but without result.<BR />I have try tu access to Paolo Alto to verify arp table (also via ssh) but arp command is not present.<BR />Howto verify if MAC address (and IP) is present?<BR />Other ideas?</P> Tue, 19 Sep 2023 08:04:22 GMT https://live.paloaltonetworks.com/t5/general-topics/detect-unknowed-device/m-p/558504#M113294 paoloholzl 2023-09-19T08:04:22Z https://live.paloaltonetworks.com/t5/general-topics/detect-unknowed-device/m-p/558529#M113298 <P>f your firewall's interfaces are in Layer3 mode, the arp command is</P> <LI-CODE lang="markup">show arp all</LI-CODE> <P>if your interfaces are in Layer2 mode, the mac command is&nbsp;</P> <LI-CODE lang="markup">show mac all</LI-CODE> Tue, 19 Sep 2023 09:21:48 GMT https://live.paloaltonetworks.com/t5/general-topics/detect-unknowed-device/m-p/558529#M113298 reaper 2023-09-19T09:21:48Z