topic Re: Adding management interface to OSPF via CLI in General Topics

Adding management interface to OSPF via CLI

hfakoor2 — Thu, 28 Sep 2023 03:40:35 GMT

I'm doing a lab and I need to SSH to the firewalls to run some python scripts,

Is there a way to set OSPF to management interacee via set commands, with a management interface of 10.1.1.75?

I got the virtual-router default into OSPF, but I can't ping to my local PC.

I cannot ping to other devices in the lab, unless I source it from a virtual-router default enabled interface..

I want to add the management interface enabled for OSPF so I can ping out to my local PC (there's a default route in OSPF), and hence have a way to SSH into the device (currently my pings from my PC work to every device in my lab, except the PA firewalls)

can someone show me how to do this via CLI commands?

Thanks

Re: Adding management interface to OSPF via CLI

hfakoor2 — Thu, 28 Sep 2023 12:58:21 GMT

any advice would be appreciated 😄

Re: Adding management interface to OSPF via CLI

Raido_Rattameister — Thu, 28 Sep 2023 13:31:36 GMT

Check this post and follow same guidelines for CLI commands.

https://live.paloaltonetworks.com/t5/general-topics/cli-commands-to-create-a-ssh-profile-via-the-cli/td-p/559649

I don't think you can enable OSPF on management interface.

Re: Adding management interface to OSPF via CLI

hfakoor2 — Thu, 28 Sep 2023 13:40:08 GMT

Okay thanks