topic Re: PA5410 Version 10.2.4 not allow to set offload to true in General Topics

PA5410 Version 10.2.4 not allow to set offload to true

Alpalo — Wed, 08 Nov 2023 12:07:24 GMT

Hello
We are detecting sporadic CPU spikes on a FW 5410 version 10.2.4 , the average is fine however, we observe sporadic spikes of 95% 96% ...100%. Before with the old FW model we did not have this problem and we have not changed any configuration.

When I try to change the session offload to True it does not allow me to do so.
admin@X> show session info | match False
Hardware session offloading: False
Hardware UDP session offloading: False
Reject TCP small initial window: False
admin@PA5410-BCN1()>

---------------------

admin@PA5410-BCN1()> show session info | match False
Hardware session offloading: False
Hardware UDP session offloading: False
Reject TCP small initial window: False

-----------------------------------------

admin@X()> set session offload yes

Invalid syntax.
admin@X()>

Any idea?

Re: PA5410 Version 10.2.4 not allow to set offload to true

akuzhuppilly — Tue, 14 Nov 2023 03:59:26 GMT

Hello @Alpalo

Based on the below KB, hardware offload is only supported in PA-32xx, PA-52xx and PA-7xxx series.

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Cm8cCAC

It could be a hardware limitation.

Re: PA5410 Version 10.2.4 not allow to set offload to true

BPry — Tue, 14 Nov 2023 14:22:38 GMT

@Alpalo,

As @akuzhuppilly mentioned this isn't a feature that you'll have access to on that platform. I recall seeing some documentation on it in the past, but I can't seem to dig it up at the moment.