Re: How to Post a LIVEcommunity Discussion

New-Memeber — Thu, 30 Jun 2022 16:59:17 GMT

Hello all,

I'm new her and with Paloalto firewalls.

anyone knows what is the default username and password PANOS vmware I use on GNS3 please.

see below.

Enter 'maint' for boot menu.
Booting PANOS (sysroot0) after 5 seconds...

Entry:
Booting 'PANOS (sysroot0)'

root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz ro root=/dev/sda2 init=/sbin/init_single_core conso
0,9600n8 console=tty0 quiet alternate_root=/dev/vda2 alternate_root=/dev
hugepages=0
[Linux-bzImage, setup=0x3c00, size=0x38c710]

cpld cpld.1536: Failed to request region 0x600-0x63f

eth0 Link encap:Ethernet HWaddr 0C:4E:C7:46:00:00
inet addr:192.168.17.131 Bcast:192.168.17.255 Mask:255.255.255.0
inet6 addr: fe80::e4e:c7ff:fe46:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:160 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:14692 (14.3 KiB) TX bytes:1026 (1.0 KiB)

Re: How to Post a LIVEcommunity Discussion

LAYER_8 — Fri, 01 Dec 2023 02:34:22 GMT

Default login for PANW is admin/admin

topic Re: How to Post a LIVEcommunity Discussion in General Topics

Re: How to Post a LIVEcommunity Discussion

Re: How to Post a LIVEcommunity Discussion