Panorama SDWAN commit "Failed plugin validation"

Will-78 — Wed, 10 Jan 2024 08:54:57 GMT

I've gone through the full beacon modules and went through instructions here on how to setup SDWAN in my lab (so I think I'm configuring it correctly): https://docs.paloaltonetworks.com/sd-wan/2-2/sd-wan-admin/configure-sd-wan

When I get to the part where I add SDWAN devices I get the error at the bottom. I am at a loss, I've tried too many different things to list here. Ideally, I'm hoping someone could direct me to where to find more info about the failure, as this message isn't very helpful (in the CLI plugins-log is empty, no SDWAN log).

I've checked my compatibilities here (and below are my current versions): https://docs.paloaltonetworks.com/compatibility-matrix/panorama/plugins

Panorama version: 10.1.11-h1

SD-WAN Plugin version: 2.2.6 (tried 2.2.5 too, only other listed as compatible with 10.1.11)

VM-Series Plugin version: 2.1.14

Failure Message:

Operation

Commit

Status

Completed

Result

Failed

Details

Partial changes to commit: changes to configuration by administrators: --
Failed plugin validation

Re: Panorama SDWAN commit "Failed plugin validation"

Will-78 — Fri, 12 Jan 2024 06:49:52 GMT

Resolution: I overlooked adding a subnet to Panorama > SD-WAN > VPN Cluster > VPN Address Pool. Once I added this it committed without issue.

My scenario was intending a VPN cluster, which auto configures a lot for you (creating interfaces etc.). I'm assuming that if I were missing any other important aspects of that it would probably throw the same, very unhelpful, error. My recommendation would be to make sure you have your predefined zones created, your SD-WAN devices added, VPN address pool, and VPN cluster configuration in place.

Other note: Documentation tells you that it will auto create a virtual router of sdwan-default. You won't see it in the GUI, but if you check the XML file from Panorama, it definitely is there.

topic Panorama SDWAN commit "Failed plugin validation" in General Topics

Panorama SDWAN commit "Failed plugin validation"

Re: Panorama SDWAN commit "Failed plugin validation"