Add 2 physical interface as hardware/software switch and tag vlan

jiaming9966 — Mon, 25 Mar 2024 14:00:58 GMT

Hi guys , i am used to be fortigate administrator , now switch to palo alto . Just wondering how to add 2 interface to hardware/software switch and tag all the vlan into the switch.

Thanks alot

Re: Add 2 physical interface as hardware/software switch and tag vlan

JayGolf — Wed, 27 Mar 2024 04:32:06 GMT

Hi @jiaming9966 ,

Welcome! You can create a Layer 2 interface and appropriate subinterfaces. For example, you can add 2 subinterfaces to eth1/7. You can name it however you prefer. You can have it reflect which vlan that subinterface belongs to. If Citrix is vlan 20 and VIP is vlan 30 for example, then the subints would appear below eth1/7 as "ethernet1/7.20 and ethernet1/7.30". Once the interface name is complete, you can tag with appropriate vlan. Then, you can hover over vlan and security zone to create the appropriate vlan/zone and assign the subinterface to. In the vlan interface creation is where you will attach your virtual router.

Check out a more detailed guide on techdocs.

topic Add 2 physical interface as hardware/software switch and tag vlan in General Topics

Add 2 physical interface as hardware/software switch and tag vlan

Re: Add 2 physical interface as hardware/software switch and tag vlan