topic Re: Panorama - unable to use log disk in General Topics

Panorama - unable to use log disk

PersonalPA220 — Tue, 19 Nov 2019 23:18:54 GMT

New Panorama 9.0.5 install. Panorama was successfully installed in a VM on a single disk. Needed space for a log volume so a second disk was created and attached to the VM. VM was rebooted, disk added using “request system disk add sdb”, disk is visible via “show system disk details", shows Admin Enabled state.

When attempting to use this volume in “Managed Collectors”, the disk doesn't show when we click Add. Tried multiple reboots to no avail.

Re: Panorama - unable to use log disk

PersonalPA220 — Tue, 19 Nov 2019 23:56:06 GMT

Problem solved by tech support.

Under "Managed Collectors" add and enter just the serial number of the collector. Commit the changes. Attempt to add a new collector and the disk will appear in the list.

Re: Panorama - unable to use log disk

JamesYork-GC — Fri, 29 Mar 2024 20:43:27 GMT

We just updated to 10.2.x and had issues after adding the disk.

We had a similar issue.

The disk would show up in the console (SSH session) and would show ready, but we could not add them to the collector.

After making a minor tweak to an object description and doing a "COMMIT" we were able to add the disk to the collector.

Don't forget to Commit after adding the disks via SSH and after adding to the collector in the GUI.

Re: Panorama - unable to use log disk

CyberEye — Thu, 18 Jul 2024 11:06:16 GMT

How to add via cli.Please share the commands

Re: Panorama - unable to use log disk

ksalustro — Thu, 29 Aug 2024 03:34:52 GMT

Panorama> show system disk details

Name : sdb
State : Present
Size : 2097152 MB
Status : Unavailable
Reason : Admin disabled

Panorama> show system disk-partition

Disk /dev/sda: 81 GiB, 86973087744 bytes, 169869312 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xaa2c8c93

Device Boot Start End Sectors Size Id Type
/dev/sda1 2176 2056319 2054144 1003M 83 Linux
/dev/sda2 2097280 18874368 16777089 8G 83 Linux
/dev/sda3 18874496 35651584 16777089 8G 83 Linux
/dev/sda4 35651648 169869311 134217664 64G f W95 Ext'd (LBA)
/dev/sda5 35651712 85983232 50331521 24G 83 Linux
/dev/sda6 85983360 98566144 12582785 6G 83 Linux
/dev/sda7 98566272 102760448 4194177 2G 83 Linux
/dev/sda8 102760576 169869311 67108736 32G 83 Linux

Disk /dev/sdb: 2 TiB, 2199023255552 bytes, 4294967296 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 98323EF7-2679-49BB-8B18-7C48ED8C9D01

Device Start End Sectors Size Type
/dev/sdb1 20480 3706898431 3706877952 1.7T Linux filesystem

Disk /dev/loop0: 10 GiB, 10737418240 bytes, 20971520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

Panorama> request system disk add sdb
Executing this command will delete all data on the drive being added. Do you want to continue? (y or n)

This may take few minutes. Run 'show system disk details' to see the status

Panorama> show system disk details

Name : sdb
State : Present
Size : 2097152 MB
Status : Busy
Reason : Add in progress

<...I waited a few minutes...>

Panorama> show system disk details

Name : sdb
State : Present
Size : 2097152 MB
Status : Available
Reason : Admin enabled

Re: Panorama - unable to use log disk

Al-Amin — Sun, 15 Dec 2024 12:15:37 GMT

Team,

We are also unable to add disk in collector in panorama. But if we checked in CLI then it shows present but admin disable.

What is the solution?

Re: Panorama - unable to use log disk

ksalustro — Mon, 16 Dec 2024 03:06:04 GMT

At the CLI if you do

So you can do

Enter the following command to view the disks on the Panorama virtual appliance:

show system disk details

The user will see the following response:

	Name
: sdb 
	State : Present 
	Size : 2048000 MB 
	Status : Available 
	Reason : Admin enabled 
	Name : sdc 
	State : Present 
	Size : 2048000 MB 
	Status : Available 
	Reason : Admin disabled

Enter the following command and confirm the request when prompted for all disks with the Reason : Admin disabled response:
request system disk add sdc

Add a Virtual Disk to Panorama on an ESXi Server