topic Fast boot PA-450 in General Topics

Fast boot PA-450

dwythe — Thu, 18 Apr 2024 20:42:46 GMT

I have a firewall that for some reason after doing a version update to 11.1 is only taking 2 to 3 min to boot now. I noticed all the logs were not showing up and the interfaces was showing down, but everything was working. I decided to do a factory reset and only do the update to 11.0.2-h2. The reboot time went to 5 min and now the I can not change the duplexing. The only option is auto. Has anyone had this issue or even know what is going on?

Re: Fast boot PA-450

kiwi — Wed, 24 Apr 2024 10:31:04 GMT

Hi @dwythe ,

Any progress on this situation ?

Have you confirmed that auto-commit has finished after booting ?

Anything showing up on console port while booting up that could indicate some failure condition ?

Kind regards,

-Kim.

Re: Fast boot PA-450

R.Seyidzada — Fri, 26 Apr 2024 10:02:47 GMT

Hi.

I also observed the mentioned problems. After upgrading from version 10.2 to 11., physical interfaces were down, ipsec tunnels were down. Monitoring was overloading and sometimes not showing logs.

I would recommend that you downgrade to the previous version.