topic Re: Palo Alto to Sonicwall in General Topics

Palo Alto to Sonicwall

MGBgt1972 — Mon, 15 Jul 2024 21:16:03 GMT

Team

I have a new SonicWALL and I'm configuring the SonicWALL with the same config as the palo alto.

I'm confused with the Interface 1/2 setup. It has no IP and it says assign interface to vlan: Office-Lan.

How do I set up this on the SonicWALL. Pls help

Re: Palo Alto to Sonicwall

OtakarKlier — Mon, 15 Jul 2024 21:49:59 GMT

Hello,

That is because interface ethernet 1/2 id a layer 2 interface and has no IP access. Only layer 3 interfaces have an IP address. I'm not sure how far you have gotten but the Palo Alto is a superior device to the SonicWall.

Regards,

Re: Palo Alto to Sonicwall

MGBgt1972 — Tue, 16 Jul 2024 04:44:03 GMT

Hi friend

We are too far gone. How would I configure the SonicWALL interface to match the palo alto interface 2. What exactly do i need to do.

Thanks

Re: Palo Alto to Sonicwall

OtakarKlier — Tue, 16 Jul 2024 13:52:24 GMT

Hello,

Sorry to hear that. Not sure how to do it on the SonicWall, however there needs to be a layer 3 interface somewhere. If in the PAN you can look under interfaces-> vlans. Perhaps try to the other vendors forums?

Best of luck.