Port fowarding from internet to inside server

RayWebster — Tue, 03 Sep 2024 16:10:16 GMT

I am trying to setup port forwading from spacific internet IPs to a server inside the firewall. This is for RDP access. We are using port 9999 to hit the firewall and translating that to 3389. Here is the NAT and Security policies I have.

When I look in the logs it looks like it never hits the security rule and it says the application is incomplete.

Any help here would be great. I have gone over and over the web and videos I can find on this NAT and port forward rule.

Re: Port fowarding from internet to inside server

Claw4609 — Tue, 03 Sep 2024 18:19:59 GMT

Hello,

It doesnt appear to be hitting your NAT rule, if it was the destination zone in the traffic logs would be "inside". Two things I would check would be verifying that the "ITSNetwork1" is in fact a part of that "ITSNetworks" address group. The other thing I would check would be the service object itself, and verify that either UDP or TCP is selected depending on what you are needing. And that the port information is filled out in the destination port sections, and that the source port (assuming you dont need to specify a source port) is left blank.

topic Port fowarding from internet to inside server in General Topics

Port fowarding from internet to inside server

Re: Port fowarding from internet to inside server