topic Ansible OSPF Validation Error in General Topics

Ansible OSPF Validation Error

Rufus-Head — Fri, 13 Sep 2024 13:50:06 GMT

Hello, I am having an issue running an Ansible Playbook for OSPF. I get the following error below. If I go into the GUI, select the virtual-router "default" and simply select "ok" on the bottom, without making a change, it will validate successfully. Would someone be able to assist?

Palo VM-100
Software: 10.1.14-h2

@JimmyHolland have you encountered this before?

Palo Validation Error Message

Details

Validation Error:
network -> virtual-router -> default -> protocol -> ospf unexpected here
network -> virtual-router -> default -> protocol -> ospf is invalid
network -> virtual-router -> default -> protocol is invalid
network -> virtual-router is invalid
network is invalid
devices is invalid
Configuration is invalid

Ansible Playbook -
---
- name: OSPF
hosts: localhost
connection: local

vars:
device:
ip_address: "10.245.255.241"
username: "<user>"
password: "<pass>"
virtual_router_name: "default"
ospf_area: "0.0.0.0"
network_interface: "ethernet1/1"
router_id: "10.10.10.101"

collections:
- paloaltonetworks.panos
- community.network.panos_set

tasks:
#Create OSPF Config
- name: OSPF
paloaltonetworks.panos.panos_config_element:
provider: "{{ device }}"
xpath: "/config/devices/entry[@name='localhost.localdomain']/network/virtual-router/entry[@name='default']/protocol/ospf"
element: >
"<enable>no</enable>
<area>
<entry name='{{ ospf_area }}'>
<type>
<normal/>
</type>
<interface>
<entry name='{{ network_interface }}'>
<bfd><profile>Inherit-vr-global-setting</profile></bfd>
<enable>yes</enable>
<passive>no</passive>
<gr-delay>10</gr-delay>
<metric>10</metric>
<priority>1</priority>
<hello-interval>10</hello-interval>
<dead-counts>4</dead-counts>
<retransmit-interval>5</retransmit-interval>
<transit-delay>1</transit-delay>
<link-type><broadcast/></link-type>
</entry></interface></entry>
</area><router-id>{{ router_id }}</router-id>
<enable>yes</enable>"

Re: Ansible OSPF Validation Error

JimmyHolland — Fri, 13 Sep 2024 14:57:53 GMT

If you have a Red Hat paid subscription for Ansible, you can raise a case with them and they will triage it with Palo Alto Networks to get it fixed.
If you don't have a Red Hat paid subscription for Ansible, please raise the issue on the GitHub repository.

Re: Ansible OSPF Validation Error

Rufus-Head — Fri, 13 Sep 2024 20:26:50 GMT

I found the issue, it was the quotes (") to start the element "<ospf> and ending </ospf>" that was causing the issue.

Working ospf playbook:

---
- hosts: localhost
connection: local
gather_facts: False

vars:
provider:
ip_address: '10.245.255.241'
username: "user"
password: "pass"
device:
ip_address: '10.245.255.241'
username: "user"
password: "pass"

tasks:

- name: Create ospf details with config_element
paloaltonetworks.panos.panos_config_element:
provider: "{{ device }}"
xpath: "/config/devices/entry[@name='localhost.localdomain']/network/virtual-router/entry[@name='default']/protocol"
element: |
<ospf>
<enable>yes</enable>
<area>
<entry name="0.0.0.0">
<type>
<normal/>
</type>
<range>
<entry name="192.168.250.0/24">
<advertise/>
</entry>
</range>
<interface>
<entry name="ethernet1/1">
<enable>yes</enable>
<passive>no</passive>
<gr-delay>10</gr-delay>
<metric>10</metric>
<priority>1</priority>
<hello-interval>10</hello-interval>
<dead-counts>4</dead-counts>
<retransmit-interval>5</retransmit-interval>
<transit-delay>1</transit-delay>
<link-type>
<broadcast/>
</link-type>
</entry>
</interface>
</entry>
</area>
<router-id>192.168.0.1</router-id>
<allow-redist-default-route>no</allow-redist-default-route>
<rfc1583>no</rfc1583>
</ospf>