topic Re: HA State is "not sycned" even though Sync Task is completed on Peer (Passive) Gerät) in General Topics

HA State is "not sycned" even though Sync Task is completed on Peer (Passive) Gerät)

f.kuecuek — Mon, 14 Oct 2024 08:14:10 GMT

Hello,

There are a few config differences between Active/Passive Firewalls like (asssigned Auth. Profil under Device section, login banner, snmp features)

When i perform sync it shows on Task Manager of Passive Firewall it is succesfully synched.

However on the Active Firewall it shows us always "not synced"

here is the show high avaiabiltiy state output from active and passive firewalls

Active :
Configuration Synchronization:
Enabled: yes
Running Configuration: not synchronized
Out-of-sync Reason: Failure to complete config sync

Passive :
Configuration Synchronization:
Enabled: yes
Running Configuration: not synchronized
Out-of-sync Reason: Peer disconnected with commit

Re: HA State is "not sycned" even though Sync Task is completed on Peer (Passive) Gerät)

BPry — Mon, 14 Oct 2024 20:13:16 GMT

@f.kuecuek,

When you try to run the following on the Active firewall what is the output?

request high-availability sync-to-remote running-config

Re: HA State is "not sycned" even though Sync Task is completed on Peer (Passive) Gerät)

f.kuecuek — Tue, 15 Oct 2024 09:12:01 GMT

HA synchronization job has been queued on peer. Please check job status on peer. -> on the passive device it says it is completed but on active device it is always not synced

Betreff: HA State is "not sycned" even though Sync Task is completed on Peer (Passive) Gerät)

f.kuecuek — Tue, 15 Oct 2024 15:19:03 GMT

It is solved with disabling and enable snyc config under HA settings