Converting SonicWALL DNAT configuration to Palo Alto DNAT Configuration

GWong4 — Wed, 18 Dec 2024 08:39:33 GMT

Hi to all the expert,

I am new to Palo Alto firewall. I need a guidance from the expert to guide how to converting SonicWALL DNAT rule to the Palo Alto DNAT rule.

SonicWALL DNAT Config:

Original Source: Any

Translated Source: Original

Original Destination: x8:V292-IP (10.204.44.33/27)

Translate Destination: Original

Original Server: Ping

Translated service: Original

Inbound Interface: X8:292

Outbound Interface: X8:292

Sincerely & much appreciated.

Best Regards

Jordan

Re: Converting SonicWALL DNAT configuration to Palo Alto DNAT Configuration

OtakarKlier — Thu, 19 Dec 2024 19:12:18 GMT

Hello,

Sounds like you would like the One-to-One NAT, Static NAT, bi-directional policy. Here a link to explain on how to set it up and other types of NAT as well.

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000CllzCAC

Also dont for get to setup your security policies to allow the traffic.

Welcome to Palo Alto!

Regards,

topic Re: Converting SonicWALL DNAT configuration to Palo Alto DNAT Configuration in General Topics

Converting SonicWALL DNAT configuration to Palo Alto DNAT Configuration

Re: Converting SonicWALL DNAT configuration to Palo Alto DNAT Configuration