Management interface woes

wstuart — Mon, 17 Mar 2025 21:56:34 GMT

I only have fiber available at the firewall location. I am using the inside interface to do management (port 13). I have configured a management profile and am able to HTTPS, SSH, and PING to that interface.

I have also configured the Service Route Configuration to use the inside interface (with a handful outside).

When I attempt to use the cli command:

"scp import configuration from"

I get "Route not found". I suspect it is because it is attempting to use the management interface that is not connected. As a troubleshooting step, I set all of the "Service Routes" to "Inside" to see if there was a service route to govern what interface scp uses, but apparently not.

Is there a way to configure the firewall to use one of the fiber ports as the default management port or force scp to use another route?

Re: Management interface woes

PavelK — Tue, 18 Mar 2025 00:26:48 GMT

Hello @wstuart

I can see in help an option to set "source-ip" (Set source address to specified interface address).

Could you try: "scp import configuration source-ip <Data Plane Interface IP address> from"

Kind Regards

Pavel

Re: Management interface woes

wstuart — Tue, 18 Mar 2025 01:41:42 GMT

Thank you! Somehow I missed that. It appears to be working.

topic Management interface woes in General Topics

Management interface woes

Re: Management interface woes

Re: Management interface woes