topic Re: cli error messages during boot in General Topics

cli error messages during boot

lostdragon — Thu, 23 May 2019 15:21:50 GMT

Dear community,

after factory resetting one of our pa220s i am seeing multiple error messages during boot up

Starting ntpd: [  OK  ]

FATAL: Module nfsd not found.
FATAL: Error running install command for nfsd
Starting NFS services:  [  OK  ]

Starting NFS mountd: [  OK  ]

Starting NFS daemon: [  OK  ]

Starting RPC idmapd: [FAILED]

Starting PAN Software: cp: cannot stat '/opt/pancfg/mgmt/wf_backup/wildfire-images/*': No such file or directory
cp: cannot stat '/opt/pancfg/mgmt/wf_backup/curwildfire/*': No such file or directory
cpld: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
cgroup: cgroups_setup (2895) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[  OK  ]

The device comes up with a green status LED, but since it is to be deployed in a far away remote location i am wondering if it is best to open a support call?

Thank you in advance for your help.

Re: cli error massages during boot

reaper — Thu, 23 May 2019 09:02:27 GMT

try loading it with appropriate licences and downloading and installing latest content packages, this may clear up the errors

Re: cli error massages during boot

lostdragon — Thu, 23 May 2019 15:39:26 GMT

@reaperThank you for your response. The device is now fully licensed and updated to PAN-OS 9.0.2 with the latest content updates.

But unfortunately some errors remain

Starting ntpd: [  OK  ]

FATAL: Module nfsd not found.
FATAL: Error running install command for nfsd
Starting NFS services:  [  OK  ]

Starting NFS mountd: [  OK  ]

Starting NFS daemon: [  OK  ]

Starting RPC idmapd: [FAILED]

Starting PAN Software: cpld: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
cgroup: cgroups_setup (2830) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[  OK  ]

Re: cli error massages during boot

MP18 — Thu, 23 May 2019 17:27:06 GMT

did you open tach case for this?

or lets see if anyone replies to this curious to know about this?

Re: cli error messages during boot

MarTe — Mon, 28 Oct 2019 17:58:17 GMT

I have the same errors just after upgrading PA-820 (out of the box- default config) from 8.1.6 to 9.0.4.

Re: cli error messages during boot

thierman — Sat, 29 Feb 2020 17:04:10 GMT

Did anyone get a resolution to this? I’m seeing the same thing. Only noticed today after my pa220 crashed. And I connect up the serial port to observe the reboot.

Re: cli error messages during boot

reaper — Sat, 29 Feb 2020 17:18:05 GMT

May want to try factory reset to fix this issue

Re: cli error messages during boot

MarTe — Mon, 02 Mar 2020 14:45:16 GMT

I was able to restore the system formatting all partition, did disk check for all partition and reinstall PAN-OS. I think that CLI error is an OS bug.

Re: cli error messages during boot

MP18 — Mon, 02 Mar 2020 16:17:59 GMT

Seems still error is there?

Re: cli error messages during boot

HemantThorve — Mon, 02 Mar 2020 23:37:56 GMT

Hi,

I have seen this message during reboot of almost all models and Pan-OS and thinking this is normal behavior. Once firewall boots up observed no issue.

Re: cli error messages during boot

ndefotsingdimitri — Wed, 11 Jun 2025 17:31:02 GMT

having the same issue. Can someone help me pls