topic Re: Internal error during selective push config generation in General Topics

Internal error during selective push config generation

N.Gibson577756 — Thu, 23 Apr 2026 13:21:28 GMT

We are currently seeing the following message when issuing a commit & push from Panorama 'Internal error during selective push config generation'.

Panorama has recently been upgraded to 11.2.11.

Another LiveCommunity post describes a similar error message appearing in 10.2 but it is not quite the same. - https://live.paloaltonetworks.com/t5/panorama-discussions/failed-to-generate-selective-push/td-p/534228

Can anyone help?

Re: Internal error during selective push config generation

Raido_Rattameister — Thu, 23 Apr 2026 13:24:42 GMT

Instead of "Commit and Push" try "Commit to Panorama" as step 1 and then "Push to Devices" as step 2.

After this make another config change and test if "Commit and Push" works again.

Re: Internal error during selective push config generation

N.Gibson577756 — Fri, 24 Apr 2026 09:04:16 GMT

Hi Raldo,

Thanks for replying! Yes we are able to successfully Commit to Panorama and Push to devices individually but the error is still present when attempting a pus and commit.

Any other suggestions?

Re: Internal error during selective push config generation

Raido_Rattameister — Mon, 27 Apr 2026 00:28:01 GMT

If you have done commit to panorama and then push to devices and issue remains then best to open support ticket.