topic Design active passive connected with vrrp switches in General Topics

Design active passive connected with vrrp switches

K.Mohamed — Mon, 11 May 2026 12:57:44 GMT

Design active passive connected with vrrp switches

for physical connection and AE i want to connect full mesh topology but want to confirm it's working like stack switches.

PA1 > (2 links sw1,sw2)

PA2 > (2 links sw1,sw2)

so for aggregation to i can assign port to the AE.

thanks.

Re: Design active passive connected with vrrp switches

Brandon_Wertz — Mon, 11 May 2026 17:44:57 GMT

@K.Mohamed wrote:

Design active passive connected with vrrp switches

for physical connection and AE i want to connect full mesh topology but want to confirm it's working like stack switches.

PA1 > (2 links sw1,sw2)

PA2 > (2 links sw1,sw2)

so for aggregation to i can assign port to the AE.

thanks.

Is there a question in this post? It sounds like you're asking if you can create a port-channel (aggregate Ethernet) from an HA A/P pair firewall to a pair of switches. Yes, you can. It's done just as you described.

PA1 > (2 links sw1,sw2)

PA2 > (2 links sw1,sw2)

Re: Design active passive connected with vrrp switches

K.Mohamed — Tue, 12 May 2026 05:36:55 GMT

incase the switches non-stack, how to create the channel for two different devices