topic Re: Firmware 4.0.8 to 4.1.8 in General Topics

Firmware 4.0.8 to 4.1.8

mario11584 — Wed, 12 Dec 2012 20:49:05 GMT

I am new to Palo Alto firewalls and I am hoping this a quick easy question for somebody who is more familiar with them. I would to like to upgrade my PA500 to latest firmware. It looks like the latest release is 4.1.8 (I am using 4.0.8). I have downloaded 4.1.8 to the firewall. Once I click install on 4.1.8, will that require a reboot of the firewall? I am assuming yes as every other vendor's firewall I have worked does require a reboot. How long should I expect the install/reboot to take? If it does require a reboot is there a way I can schedule the firewall to install the update during non production hours? Also, is there anything I need to know about updating from a 4.0 version to a 4.1? I can't find ANY of the details in the dozens of documents I have read. Any help on this would be appreciated. Thanks!

Re: Firmware 4.0.8 to 4.1.8

mikand — Wed, 12 Dec 2012 20:59:11 GMT

Yes switching firmwares will require a reboot.

In your case running 4.0.8 I think the recommended way of upgrading would be to first download and install (and reboot into) 4.1.0, and then do the same from 4.1.0 into 4.1.8 (or whatever 4.1 version you might want to use - 4.1.9 is the latest currently).

Or while you are at it, go straight to 5.0.x ?

Re: Firmware 4.0.8 to 4.1.8

mario11584 — Wed, 12 Dec 2012 23:16:25 GMT

Thanks for your answer. One other related question. During the update/reboot process, will my HA or standby PA be updated as well or do I have to jump on it and update it separately? I am hoping it's part of the process. That would be pretty lame if it didn't do it automatically.

Re: Firmware 4.0.8 to 4.1.8

mikand — Thu, 13 Dec 2012 08:00:34 GMT

You will have to update the standby unit on its own for obvious reasons.

One way to limit number of possible hickups for current sessions is to start the update on the standby unit. Then perform a failover and update the other device (this way you only have one failover instead of two). However im not sure what will happen to the session sync when switching major version.

Re: Firmware 4.0.8 to 4.1.8

ExclusiveNetworksGermany — Thu, 13 Dec 2012 09:01:46 GMT

You can directly upgrade to 4.1.9 (4.1.0 have to be downloaded but there is no need to install 4.1.0)

Since this is a Major Release update plan more time for the Upgrade.

Depending on the size of your Log Database we have seen upgrade time >30 min

till the Firewall is productive again.

A direct upgrade from 4.0.x to 5.0.x is not possible, you have to go through 4.1.x

please read the Release Notes before upgrading.

Regards

Marco

Re: Firmware 4.0.8 to 4.1.8

mbutt — Thu, 13 Dec 2012 17:13:17 GMT

Hi,

If you are going from 4.0.8 to 4.1.8.

The main difference i can think of is that if you are using sslvpn netconnect. It is not available in 4.1.x anymore. It will change the netconnect to global protect automatically.

Also if you are going from 4.0.8 to 4.1.8

the steps would be as follows

download 4.1.0

down and install 4.1.8

and yes after you install the system will require a reboot.

Thanks

Numan