Certain logs not sending to Splunk

Fariq_Zaidi — Thu, 06 Aug 2026 01:58:39 GMT

Hi All,

PA 1410
PAN-OS 11.1.13-h9
license valid
Advanced URL Filtering

Advanced WildFire License

Just recently i have configure Log forwarding to our Splunk. We follow this document
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClGwCAK

the splunk is successfully receive Traffic, Threat, System, GlobalProtect, and Config logs. But we missing the URL, wildlfire and tunnel logs

can advise how to check further.

Thank you

Re: Certain logs not sending to Splunk

JayGolf — Thu, 06 Aug 2026 03:38:23 GMT

Hi @Fariq_Zaidi ,

How do you have your log forwarding profile configured? Do you have your log types set to All Logs for URL, Wildfire, and Tunnel?

For URL you also want to make sure that URL Filtering profile uses an action such as alert, block, or continue for the categories you want logged. Categories set to allow may not generate a URL log.

For the Tunnel logs, please confirm whether Tunnel Content Inspection is configured under Policies > Tunnel Inspection and whether logs are generated locally under Monitor > Logs > Tunnel Inspection. This log type applies to supported cleartext tunnels passing through the firewall and is separate from standard IPsec VPN status events. If you are looking for standard IPsec VPN events such as tunnel status, negotiation, or tunnel-monitor messages, those are typically found in the System logs. So you should be covered there.

If you go to Monitor > Logs > Wildfire , do you see logs generated there during the time frame of when you were monitoring Splunk?

topic Certain logs not sending to Splunk in General Topics

Certain logs not sending to Splunk

Re: Certain logs not sending to Splunk