topic Re: Palo Alto configure as access port in General Topics https://live.paloaltonetworks.com/t5/general-topics/palo-alto-configure-as-access-port/m-p/17388#M12693 <HTML><HEAD></HEAD><BODY><P>Yes, you can configure an interface in L2 mode without vlan tagging (access mode). Configure as L2 interface type and specify a vlan on the ethernet interface itself. Then assign the interface to a zone. That should be it. Do NOT configure a unit for the interface which would require tagging (trunk mode).</P><P></P><P>-Richard</P></BODY></HTML> Mon, 13 Jun 2011 19:22:36 GMT Retired Member 2011-06-13T19:22:36Z Palo Alto configure as access port https://live.paloaltonetworks.com/t5/general-topics/palo-alto-configure-as-access-port/m-p/17387#M12692 <HTML><HEAD></HEAD><BODY><P>Hi All,</P><P></P><P>It has been sometime that i haven't touch on Palo Alto device and i want to clarify whether can i configure as access port (or called as untagged port) other than normally create L3 vlan routing?</P><P></P><P>I don't see such settings available on the configuration.</P></BODY></HTML> Mon, 13 Jun 2011 15:07:05 GMT https://live.paloaltonetworks.com/t5/general-topics/palo-alto-configure-as-access-port/m-p/17387#M12692 eugene 2011-06-13T15:07:05Z Re: Palo Alto configure as access port https://live.paloaltonetworks.com/t5/general-topics/palo-alto-configure-as-access-port/m-p/17388#M12693 <HTML><HEAD></HEAD><BODY><P>Yes, you can configure an interface in L2 mode without vlan tagging (access mode). Configure as L2 interface type and specify a vlan on the ethernet interface itself. Then assign the interface to a zone. That should be it. Do NOT configure a unit for the interface which would require tagging (trunk mode).</P><P></P><P>-Richard</P></BODY></HTML> Mon, 13 Jun 2011 19:22:36 GMT https://live.paloaltonetworks.com/t5/general-topics/palo-alto-configure-as-access-port/m-p/17388#M12693 Retired Member 2011-06-13T19:22:36Z