PAN Agent Over WAN issues.

ta185020 — Sat, 26 Mar 2011 06:22:07 GMT

Hi PA Champions,

I have had issues with high b/w utilization from PA-FW to PAN Agent over WAN links.

As such best alternate was to install a PAN Agent in remote WAN Site DC's, along with the PAN Agent

that is already installed at the Head office.

But once I had done with installation with the PAN Agent in the WAN site, I have had issues

with PA-FW trying to reference every user, even users fromthe Head Office to the WAN DC PAN agent.

As such, a user who was earliers successfully logging on to the PAN agent in the Head Office,

now is not able to browse, and it says its blocked, and witih in the blocked page it mentions his local IP address

as the 'user name' (Source) not the correct user name.

i.e Blocked User= <IP address>

This has happend only after installing and configuring the WAN Pan Agent.

Once We remove the WAN Site pan agent configuration from the PA-FW, everything is working fine as before.

No issues.

I presume this is cause the Head Office PAN Agent is not being used by PA-FW for referencing this user.

When I checked the PAN Agent status it showed me the following.

admin@DP-PAFW01(active)> show user pan-agent statistics

Timer: interval of group membership retrieval
State: *:primary pan-agent to retrieve group membership
---------------- --------------- ----- ------- ------------------ ------ ------ -------- -------- -------- --------------- -----
Name             IP Address      Port Vsys     State             Users Grps   IPs      Activity Timer(s) Domain          Index
---------------- --------------- ----- ------- ------------------ ------ ------ -------- -------- -------- --------------- -----
PAN-Agent-01     10.0.2.20       7799 vsys1    connected, ok     0      0      10091    58       600      dpf             1
PAN-Agent-Ghu 10.12.111.14    7799 vsys1   *connected, ok     12660 443    59       67       600      dpf             2

Any idea on what is the best practice or best way to install and configure PAN Agent on the WAN DC's

so that the local Head office PAN agent can also be used for all head office users.

How can I make the PA-FW understand that the PAN Agent at the head office should be the

primary pan-agent to retrieve group membership and not the newly installed WAN Site PAN.

Thanks and Rgds,

Tauseef Ahmed.

Re: PAN Agent Over WAN issues.

rapoint_person — Tue, 29 Mar 2011 11:49:12 GMT

Are your ip-user matchings aging out @ the PAN-Agent? I have seen that being an issue where old mappings make their way to the PAN. In other words, make sure the mappings age out on the PAN-agent! Have you disabled WMI/Netbios probing?

topic PAN Agent Over WAN issues. in General Topics

PAN Agent Over WAN issues.

Re: PAN Agent Over WAN issues.