topic Re: "Interface X has no zone configuration" error when commiting in General Topics

"Interface X has no zone configuration" error when commiting

JohnPetrucci — Wed, 12 Dec 2012 17:09:30 GMT

The loopback interfaces clearly are assigned to security zones. Version 5.0.1

Re: "Interface X has no zone configuration" error when commiting

mikand — Wed, 12 Dec 2012 20:36:20 GMT

What if you for the first commit just set "none" as security zone and on the second commit select "trust"?

I also thinking if the ip's you selected for loopback perhaps cannot exist on trust since the range they are part of already exists on a different zone (like untrust or such)?

Re: "Interface X has no zone configuration" error when commiting

JohnPetrucci — Thu, 13 Dec 2012 14:31:36 GMT

Nope on both counts.

Re: "Interface X has no zone configuration" error when commiting

mbutt — Thu, 13 Dec 2012 17:04:01 GMT

Hi,

Can you revert it to running config and then make the changes again. Let us know if that helps.

Also another things you can try is to put them on a different zone if possible and then try to do the commit and see if that helps.

Thank you

Numan

Re: "Interface X has no zone configuration" error when commiting

serwis.nge — Tue, 18 Dec 2012 15:02:43 GMT

Hi,

I had the same problem. For me the solution was to configure the zones and commit at the CLI level.

Re: "Interface X has no zone configuration" error when commiting

JohnPetrucci — Tue, 18 Dec 2012 15:27:43 GMT

Thanks. This worked. Sounds like it should be added to the bug list.

Re: "Interface X has no zone configuration" error when commiting

Ravishanker — Wed, 01 Mar 2023 20:06:02 GMT

I had the same problem while pushing changes from panorama . For me the solution was to enable MultiVsys capability (device>setup> General Settings > enable Multi Virtual System Capability) and then commit and push changes.

Note:- if FWs are in HA then post enabling multi virtual system option HA will go in suspended mode , you need to fix by disabling HA on both device and then re enable )