topic Re: PA200 process running at 100% in General Topics

PA200 process running at 100%

Ante — Wed, 12 Dec 2012 09:21:25 GMT

Hi there,

I've seen a task called pan_task taking up 100% cpu on two of my PA200's. Is this a PA200 specific thing? Not seen this on any other hardware platform, looking into it further it does not look like it's actually using 100% CPU, wondering if it's something to do with the single cpu architecture and splitting the two cores to backplane/management plane.

Any advice would be greatly appreciated.

Running latest threat, url and PAN OS 4.1.9

Cheers

Re: PA200 process running at 100%

rmonvon — Wed, 12 Dec 2012 15:53:51 GMT

Hi...I recommend that you open a support case on this if the CPU remains at 100% for extended duration. Thanks.

Re: PA200 process running at 100%

kfindlen — Wed, 12 Dec 2012 17:12:11 GMT

Hello,

Having pan_task run at 100% on a PA-200 is normal. The pan_task process is the software dataplane which always runs at 100% when looking at the "show system resources" output. To determine the actual load on the dataplane you could use " show running resource-monitor minute last 5".

Thanks,

-- Kevin

Re: PA200 process running at 100%

Ante — Fri, 14 Dec 2012 10:38:31 GMT

Hi Kevin,

Many thanks for the reply! I did suspect that it was a "normal" behavior. I did look at the show running resource-monitor and didn't find it correlating. (thus posting here)