topic Specifications for multimode fiber module,. in General Topics

Specifications for multimode fiber module,.

Gururaj — Thu, 21 Jun 2012 04:52:36 GMT

Hi All,.

We are trying to use fiber port in the PA 2050 box, which needs to be directly connect to switch. we used the fiber module ( Multi-mode ) which is same as used at the switch end, But the communication is not happening between the switch and PaloAlto device. Is there any specification for fiber module ( for multi mode )? or did we need to buy it from the PaloAlto?

Thanks in advance.

Re: Specifications for multimode fiber module,.

spolo — Thu, 21 Jun 2012 15:40:28 GMT

Tough to determine what your problem is, but yes, it's recommended that you use a Palo Alto Networks SFP module for both support reasons and also for compatibility. Talk to your partner or local Palo Alto Networks sales team, part numbers are as follows, but I think the SFP you're looking for is the PAN-SFP-SX :

PA-2000, PA-4000, PA-5000	PAN-SFP-LX	SFP LX transceiver (PA-5000 series, PA-4000 series, PA-2000 series)
PA-2000, PA-4000, PA-5000	PAN-SFP-SX	SFP SX transceiver (PA-5000 series, PA-4000 series, PA-2000 series)
PA-2000, PA-4000, PA-5000	PAN-SFP-ZX	SFP-ZX, 1Gbps
PA-4060	PAN-XFP-LR	XFP LR 10GigE transceiver (PA-4060)
PA-4060	PAN-XFP-SR	XFP SR 10GigE transceiver (PA-4060)
PA-5050, PA-5060	PAN-SFP-PLUS-CU-5M	SFP+ 10GigE Passive Cable Assembly (PA-5060, PA-5050)
PA-5050, PA-5060	PAN-SFP-PLUS-LR	SFP+ LR 10GigE transceiver (PA-5060, PA-5050)
PA-5050, PA-5060	PAN-SFP-PLUS-SR	SFP+ SR 10GigE transceiver (PA-5060, PA-5050)

Re: Specifications for multimode fiber module,.

spolo — Thu, 21 Jun 2012 17:59:55 GMT

This spec sheet attached may also help!