topic Draytek Vigor - Site to Site VPN in General Topics

Draytek Vigor - Site to Site VPN

UKRB — Mon, 14 May 2012 15:54:51 GMT

Hi there,

I'm looking to setup a few site to site VPNs using a PA2020 at our HQ site with Draytek Vigor 2830n routers at the other end. We have fixed IP addresses on the other end so I don't need to worry about the issues with dynamic IPs.

I was wondering if anyone has experience with setting them up and if they had any issues getting them up and running. I'll be working through it over the next week or so and hope to post any issues or a full solution should it go ok!

Cheers,

UKRB

Re: Draytek Vigor - Site to Site VPN

sjamaluddin — Thu, 17 May 2012 21:34:36 GMT

Hope this helps.

https://live.paloaltonetworks.com/docs/DOC-1163

If the remote site has static IP addresses, then the PAN FW would have to initiate the IPSec Tunnel - during your config you'd need to configure the known static peer IP address.

Re: Draytek Vigor - Site to Site VPN

Chris.F — Tue, 16 Feb 2016 01:46:52 GMT

BUMP!!!

Anyone have success in configuring a IPsec tunnel between a Draytec Vigor and a Palo Alto?

Thanks.