topic Having trouble with link aggregation using 10G ports in General Topics https://live.paloaltonetworks.com/t5/general-topics/having-trouble-with-link-aggregation-using-10g-ports/m-p/23444#M17091 <HTML><HEAD></HEAD><BODY><P>We have a cluster of&nbsp; two PA-5060 running in active-passive mode. Two 10G interfaces are configured as an aggregated interface. They are connected to two Avaya 8600 switches which are running SMLT. Whenever a failover happens, the aggregated interface fails. We have to unplug and re-plug in the cable to make the interface start working again. Shutting down the interfaces and re-activating them doesn't help. Anyone has similar experience? </P></BODY></HTML> Mon, 23 Sep 2013 16:57:59 GMT Yang_Chen 2013-09-23T16:57:59Z Having trouble with link aggregation using 10G ports https://live.paloaltonetworks.com/t5/general-topics/having-trouble-with-link-aggregation-using-10g-ports/m-p/23444#M17091 <HTML><HEAD></HEAD><BODY><P>We have a cluster of&nbsp; two PA-5060 running in active-passive mode. Two 10G interfaces are configured as an aggregated interface. They are connected to two Avaya 8600 switches which are running SMLT. Whenever a failover happens, the aggregated interface fails. We have to unplug and re-plug in the cable to make the interface start working again. Shutting down the interfaces and re-activating them doesn't help. Anyone has similar experience? </P></BODY></HTML> Mon, 23 Sep 2013 16:57:59 GMT https://live.paloaltonetworks.com/t5/general-topics/having-trouble-with-link-aggregation-using-10g-ports/m-p/23444#M17091 Yang_Chen 2013-09-23T16:57:59Z Re: Having trouble with link aggregation using 10G ports https://live.paloaltonetworks.com/t5/general-topics/having-trouble-with-link-aggregation-using-10g-ports/m-p/23445#M17092 <HTML><HEAD></HEAD><BODY><P>This configuration is actually a Palo Alto Networks recommended deployment.&nbsp; If you are using 802.3ad for link aggregation, you should have no issues.&nbsp; I would suggest you open a case with support so that the issue can be tracked and hopefully resolved.</P><P></P><P>-chadd.</P></BODY></HTML> Mon, 23 Sep 2013 17:57:11 GMT https://live.paloaltonetworks.com/t5/general-topics/having-trouble-with-link-aggregation-using-10g-ports/m-p/23445#M17092 cchristiansen 2013-09-23T17:57:11Z Re: Having trouble with link aggregation using 10G ports https://live.paloaltonetworks.com/t5/general-topics/having-trouble-with-link-aggregation-using-10g-ports/m-p/23446#M17093 <HTML><HEAD></HEAD><BODY><P>If this helps any, we have a client that has 2 x PA-5060 in HA with link aggregation with no issues running 5.0.4 the only difference is an active/active setup rather than active/passive</P></BODY></HTML> Mon, 23 Sep 2013 18:55:44 GMT https://live.paloaltonetworks.com/t5/general-topics/having-trouble-with-link-aggregation-using-10g-ports/m-p/23446#M17093 ericv 2013-09-23T18:55:44Z