Remote Management using Public IP (on different port)

Retired Member — Tue, 08 Apr 2014 08:08:55 GMT

Hi,

I have setup my device management to use the public ip. it's working fine but i want the management to be done using a different port. currently its using https(443). how can i configure this?

Please help.

Thank you.

Re: Remote Management using Public IP (on different port)

jdelio — Tue, 08 Apr 2014 13:43:16 GMT

When wanting to use a port other than 443 to manage the Firewall via the GUI, you have 2 options:

1. Use the Interface Management Profiles to select the ports that you want to manage the device with. You only have 2 options for GUI access, 80 (HTTP) and 443 (HTTPS). You have Telnet and SSH if you wanted to manage the device the CLI. Once the ports/services have been selected, you then will apply that Interface Management Profile to the interface in the advanced options for the interface.

2. The other option would be to use a loopback or management interface to manage via HTTP or HTTPS.

These are your only options at this time.

NOTE: HTTP OCSP is used for Certificate's and not applicable for GUI access.

topic Remote Management using Public IP (on different port) in General Topics

Remote Management using Public IP (on different port)

Re: Remote Management using Public IP (on different port)