topic GlobalProtect Local LAN Printing in General Topics

GlobalProtect Local LAN Printing

ccaruso — Wed, 20 Nov 2013 13:59:06 GMT

I have GlobalProtect running for machines when they are off the network. Is there anything that I need to setup that would allow them to be able to print to their local LANs even though the agent is connected back to the FW? I am currently testing this right now, but users most definitely will need to print when not in the office, so I am hoping that someone has some insight on this. Thanks for any assistance you can offer.

Corey

Re: GlobalProtect Local LAN Printing

Phoenix — Wed, 20 Nov 2013 15:39:43 GMT

Hello ccaruso,

In the GlobalProtect configuration configure the AccessRoute such that all the subnets to connect to corporate are added and not everything ( 0.0.0.0/0). Now anything apart from corporate network would use the local home lan card to access internal resources.

By this way you are achieving split tunneling.

Thanks

Re: GlobalProtect Local LAN Printing

SinovuyoGamnca — Fri, 23 Sep 2022 09:17:52 GMT

Good day,

How would I go on about creating the below?

We would like to print to x.x.x.x/24 when connected via Global protect (x.x.x.x/24). This site was recently removed from the MPLS and an IPSec tunnel setup between the PAN and the FG. We used to be able to print to x.x.x.x/24 when Site A was on the MPLS.