topic Device Upgrade 2020 to 5000 in General Topics

Device Upgrade 2020 to 5000

ahmedf — Sun, 02 Sep 2012 22:12:01 GMT

Hi,

We are planning to upgrade PAN 2020 series to 5020 or 5050. I am wondering if we can simply restore the backup of a 2020 on 5020 and everything should work fine. We are running software version 4.1.7. Currently we are running with active/standby pair of 2020 and we have two vwire, two HA and one captive portal interface on each box.

Thanks,

Farhan

Re: Device Upgrade 2020 to 5000

mikand — Mon, 03 Sep 2012 08:39:49 GMT

I think it should work fine.

However there are a few manual steps involved depending on which features you use. For example if you use custom block/continue-pages and ssl-termination, then those needs to be manually loaded afterwards (or beforehand - I dont recall if the config will scream or not if the cert is missing when loading the conf).

Re: Device Upgrade 2020 to 5000

bvandivier — Tue, 04 Sep 2012 23:38:47 GMT

Mikand is correct. You will need to manually import items such as certificates, custom block pages, etc. For the most part the transition should be smooth with the exception of the hardware differences between the 2000 series and 5000 series (i.e. physical interfaces). If you do run into any issues, configuration adjustments can be made after successfully importing the configuration into your 5000 series device.

Re: Device Upgrade 2020 to 5000

ahmedf — Wed, 05 Sep 2012 17:50:25 GMT

Thank you both. I will try to migrate the config and let you know in case of any issues. I was told by our SE that the interfaces are same on the 2020 and the 5020 box. Is that right?

Thanks,
Farhan

Re: Device Upgrade 2020 to 5000

bvandivier — Wed, 05 Sep 2012 18:04:38 GMT

The PA-2020 has twelve 10/100/1000 copper ethernet interfaces (ethernet1/1 through ethernet1/12) as well as two optical SFP Gigabit interfaces (ethernet1/13 and 1/14)

http://media.paloaltonetworks.com/documents/PA2000_Specsheet.pdf

The PA-5020 has twelve 10/100/1000 copper ethernet interfaces (ethernet1/1 through ethernet1/12) as well as eight optical SFP Gigabit interfaces (ethernet1/13 through 1/20).

http://media.paloaltonetworks.com/documents/PA5000_Specsheet.pdf

They are identical with the exception of the additional SPF interfaces on the 5020. The 5020 also has dedicated HA1 and HA2 interfaces.

I don't anticipate an issue migrating the configuration with the exception of the dedicated HA interfaces on the 5020 which you will want to take advantage of.