topic Re: Panorama Security policy & Filtering in General Topics https://live.paloaltonetworks.com/t5/general-topics/panorama-security-policy-filtering/m-p/27206#M19848 <HTML><HEAD></HEAD><BODY><P>Are you using IE or Firefox?&nbsp; Firefox is the preferred browser at this time. You should create a case with support for this issue.</P><P></P><P>Steve Krall</P></BODY></HTML> Thu, 17 Mar 2011 23:25:19 GMT skrall 2011-03-17T23:25:19Z Panorama Security policy & Filtering https://live.paloaltonetworks.com/t5/general-topics/panorama-security-policy-filtering/m-p/27205#M19847 <HTML><HEAD></HEAD><BODY><P>I may be being a bit thick (entirely possible). But, when I'm in the security policy on Panorama (pre rules) i want to be able to filter only the particular rules that are on a particular target vsys. Currently I have 2 virtual systems on a single PA4050 - but the rules for both are in the same policy. There is a filter bar at the top of the screen - but it doesn't seem to allow me to filter as expected (I've tried all sorts of combinations!!). I'm running 4.0.1 in a test environment - don't know if I could do this in 3.1.x as we only had one vsys on the firewall at that point. Thanks!</P></BODY></HTML> Thu, 17 Mar 2011 12:57:59 GMT https://live.paloaltonetworks.com/t5/general-topics/panorama-security-policy-filtering/m-p/27205#M19847 fmd 2011-03-17T12:57:59Z Re: Panorama Security policy & Filtering https://live.paloaltonetworks.com/t5/general-topics/panorama-security-policy-filtering/m-p/27206#M19848 <HTML><HEAD></HEAD><BODY><P>Are you using IE or Firefox?&nbsp; Firefox is the preferred browser at this time. You should create a case with support for this issue.</P><P></P><P>Steve Krall</P></BODY></HTML> Thu, 17 Mar 2011 23:25:19 GMT https://live.paloaltonetworks.com/t5/general-topics/panorama-security-policy-filtering/m-p/27206#M19848 skrall 2011-03-17T23:25:19Z