topic Re: Panorama for logging/reporting ONLY in General Topics

Panorama for logging/reporting ONLY

jclingan — Mon, 10 Nov 2014 16:24:07 GMT

If I want to use panorama for extended logging and reporting functionality only, are there any settings or configuration needs that I should be aware of? Should I disable the panorama objects and templates?

Re: Panorama for logging/reporting ONLY

ssharma — Mon, 10 Nov 2014 16:28:11 GMT

Yes, if you don't want to manage device you can disable those options that you mentioned above. Though it is not required. You just have to make sure you configured Log Forwarding under Objects to send everything to Panorama and use it under Security Policy to forward logs to Panorama.

This way all the logs that match the policy will be forwarded to Panorama. Hope this helps. Thank you.

Re: Panorama for logging/reporting ONLY

ssharma — Mon, 10 Nov 2014 16:30:47 GMT

Hope this helps. Thank you.

Re: Panorama for logging/reporting ONLY

jclingan — Mon, 10 Nov 2014 16:35:22 GMT

Thanks ssharma. Must you still add the device serial numbers to panorama?

Re: Panorama for logging/reporting ONLY

hshah — Mon, 10 Nov 2014 16:43:17 GMT

Hi Jclingan,

You need following configuration details.

1. Panorama IP address configured on End firewall.

2. Add End Firewalls serial number on Panorama in Managed Devices.

3. With each policy add a Log forwarding Profile which says farward all logs to Panorama.

4. You dont need Template or Device Group config.

Let us know for additional query.

Regards,

Hardik Shah