topic Re: CLI part 2 in General Topics

CLI part 2

infotech — Tue, 27 May 2014 17:14:32 GMT

I have recieve some good information concerning CLI. But ever time I get online with a PA engineer they do a lot more than what is listed in the documentation I have recieved. So I am looking to see if there is a more comprehensive guid on troubleshooting via CLI, GUI and general trouble shooting tips

Re: CLI part 2

HULK — Tue, 27 May 2014 17:28:23 GMT

Hello Infotech,

FYI:

Command Line Interface Reference Guide Release 6.0

PAN-OS Command Line Interface Reference Guide Release 5.0

Thanks

Re: CLI part 2

infotech — Tue, 27 May 2014 18:06:03 GMT

Thanks I had both of those, and will look them over again but it seems like when I see you or anyother engineer use them its a lot easier and more usefull than when I do it.

Re: CLI part 2

infotech — Tue, 27 May 2014 19:15:21 GMT

I looked these over some more and this is the documents I need now I need guidance on the best way to use them

Re: CLI part 2

mbutt — Thu, 29 May 2014 15:23:14 GMT

If you have 6.0 installed software you can use a new find CLI command to find any command with the key word.

Here is an example

§admin@PA-500> find command keyword CLI keyword
<Enter> Finish input

admin@PA-500> find command keyword fpga
debug device-server set configbasic|tdb|fpga|all>
debug device-server unset configbasic|tdb|fpga|all>

§Find configurations in configure mode
admin@PA-500# find command keyword "asymmetric“
set deviceconfigtcpdrop|bypass>
set network profiles zone-protection-profile <name> asymmetric-path <global|drop|bypass>

This will reduce the use of the CLI guide and also help in finding relative commands quickly. Hope this helps you with the usability question.

Thanks

Numan

Re: CLI part 2

infotech — Thu, 29 May 2014 15:57:36 GMT

I am only at verision 5.0.6 right now so I assume the commands you listed won't work for me at this time

Re: CLI part 2

mbutt — Thu, 29 May 2014 16:16:43 GMT

That is correct it is a feature of 6.0 release.

Thanks

Numan