topic Get FQDN table using XML-API? in General Topics

Get FQDN table using XML-API?

Npiacentine — Wed, 12 Jun 2013 18:13:46 GMT

Does anyone know if it's possible to get the current FQDN table (CLI> request system fqdn show) using the XML-API? We recently had an issue where a bad FQDN mapping was retrieved and I want to set up monitoring to catch it if it happens again.

Re: Get FQDN table using XML-API?

Retired Member — Wed, 12 Jun 2013 18:48:00 GMT

/api/?type=op&cmd=<request><system><fqdn><show></show></fqdn></system></request>

You can use that.Don't forget to add key into this.

Re: Get FQDN table using XML-API?

VinceM — Wed, 12 Jun 2013 18:48:48 GMT

To know if it's possible, the good method is to connect on your palo with at the end /api. THen you will see all command which can be called by API.

And it seem for you it is with something like: /api/?type=op&cmd=<request><system><fqdn><show></show></fqdn></system></request>

don't forget authentication.

Re: Get FQDN table using XML-API?

VinceM — Wed, 12 Jun 2013 18:49:37 GMT

take to many time to type my answer 🙂

Re: Get FQDN table using XML-API?

Retired Member — Wed, 12 Jun 2013 18:54:00 GMT

upwards is the first

Re: Get FQDN table using XML-API?

Npiacentine — Tue, 06 Aug 2013 16:52:39 GMT

I got it to work, but only with the "admin" user. My "readonly" user (role "Superuser (read-only), Administer/View: (Everything)) gets access denied. Is there any way to grant access to my readonly user? ...I'd rather not use the admin user's key if possible.