topic GlobalProtect : Access to https on loopback unreachable from WAN in General Topics

GlobalProtect : Access to https on loopback unreachable from WAN

nicolas.berthelot — Mon, 29 Apr 2013 08:59:23 GMT

Hi,

I have some trouble to get access to portal on

This is my problem and configuration :

When I try to get access to the portal on the loopback https://192.168.4.250 from Wifi access or Wan access but I don’t have a response.

No packet come on the palo alto, I see on my internet router the “syn” but no “ack”

The access to the portal from my LAN palo alto (192.168.5.0/24) is working.

For test, I configured the management on the loopback (ping/https/snmp) and… It’s responding and I can get access to the PA200. Unfortunately https stay unreachable from Wan or Wifi.

That’s mean the routing is OK, the policy it’s OK but 443 NOK.

I have tried to configured the portal in another port (With NAT configuration), access in local on the portal is OK… but via wan or wifi access NOK…

I spend a lot of time on configuration and I really don’t understand.

If somebody can help me to get worked !

Re: GlobalProtect : Access to https on loopback unreachable from WAN

adeboss — Tue, 30 Apr 2013 14:49:44 GMT

Do you have a security policy allowing traffic identified as 'panos-global-protect' from the "Wifi Access" zone to the "GP Portal" zone ?

Re: GlobalProtect : Access to https on loopback unreachable from WAN

nicolas.berthelot — Thu, 02 May 2013 09:12:43 GMT

Hi,

Wifi zone and GP portal zone are the same zone.

I have a 'any/any' policy to be sure that's not a blocking rule.

In monitor tab, but I don't see the request HTTPS (block or allow)