topic Re: I don't know how to set zone protection in General Topics

I don't know how to set zone protection

SilverTiger — Tue, 07 May 2013 10:49:29 GMT

Hi~

I have a question,,

We know that,,,

Paloalto appliance is not primary dos soultion

so one support some dos feature (TCP Flood, UDP Flood, ICMP 0 Packet someting like that etc,,)

I had poc from customer site

I set zone protection between Tap Zone and Tap zone

customer asked me;;

why is palaalto do not represent about source ip and dst ip,,,

also I don't know too until now,,,

That mean is that Monitor - Threat

There are many Threat Traffic

but,, only TCP Flood was not Attacker and Vicitim IP Address

just represent 0.0.0.0

0.0.0.0

how come,,,~

Tell me the reaseon?

Customer is very curious;;

and so

If I set Policy Dos Protection

should monitoring threat is represent 0.0.0.0?

That it

bye

Retired Member — Thu, 23 May 2013 20:12:14 GMT

Check this document and it'll show you how it works

SilverTiger — Fri, 24 May 2013 00:55:24 GMT

where can I find 0.0.0.0?

emr_1 — Fri, 24 May 2013 02:42:20 GMT

page15

In addition, I'll let you know how to use Adobe PDF Reader.

If you are using other PDF Reader, please google it by yourself.

People was discussing about same topic in the following thread.

I recommend you to read this thread too.

SilverTiger — Fri, 24 May 2013 05:12:27 GMT

Thank you~!

First, I will check how to attack way,, T-T

It is hard to study

and If I configured Dos Profile(Policy - Dos Protection) Can I see ip address

because,,, Soure Zone, Address | Dst Zone, Address could be configured by Dos Protection