topic Re: Could I use a Asian 2 bytes charset on CLI when I configure? in General Topics

Could I use a Asian 2 bytes charset on CLI when I configure?

Roh1 — Thu, 11 Apr 2013 08:14:02 GMT

Hello

I tried to configure on CLI using 2bytes Asian charset as below.

As you see below when I configure 2bytes Asiasn charset to description column and then PAN showed error message is Server error : Malformed Request.

So I questioned weather PAN could be configured using Asian charset on CLI or not.

admin@PA1(active)# set rulebase security rules rule1 description 2013

[edit]

admin@PA1(active)# set rulebase security rules rule1 description 20130410_db

[edit]

admin@PA1(active)# set rulebase security rules rule1 description 20130410_db_아무개

Server error : Malformed Request

[edit]

admin@PA1(active)# set rulebase security rules rule1 description "20130410_db_아무개_1st"

Server error : Malformed Request

Thanks.

Re: Could I use a Asian 2 bytes charset on CLI when I configure?

ymiyashita — Fri, 12 Apr 2013 02:10:36 GMT

Please try it 5.0.4. There's one fix regarding this.

Here's the description in 5.0.4 release note:

"47217—Command line interface would not accept input in languages that use a 2-byte character set such as Japanese or Chinese in UTF-8. Issue has been resolved with this release."

Re: Could I use a Asian 2 bytes charset on CLI when I configure?

KiCheon.Lee — Mon, 22 Sep 2014 16:37:31 GMT

Hello Roh,

I have a question after have read your question.

Can you input double-bytes on CLI window?

I have nerver succeeded to input double-bytes on CLI.

Please let me know how to input it.

Thanks,

KC Lee

Re: Could I use a Asian 2 bytes charset on CLI when I configure?

Retired Member — Thu, 25 Sep 2014 09:11:47 GMT

Hi KC,

You have to enable the scripting mode as below

> set cli scripting-mode on

> configure

# set shared address korea-good description "노재웅짱짱맨"

It is working as I expected

Thanks.

Regards,

Roh