topic cannot put a interface to work in General Topics

cannot put a interface to work

luisneves — Wed, 27 Jun 2012 10:45:03 GMT

hello everybody,

I configured an interface, ethernet/5, with ip 192.168.230.1/29 and connected to a device with ip 192.168.230.3/29

Theres no way i can see each other, cannot ping PaloAlto from the other device and vice versa

Ive already changed cables, changed IP ranges, changed network mask, changed interface port, added a managment profile to the interface, and none worked

I have another PaloAlto in another building, made the same configuration and it worked fine, but with this equipment (that is working and has other interfaces working in production) i cannot use any other interfaces! Do some kindly soul have any ideia on this issue?

Best regards,

Luis Neves

Re: cannot put a interface to work

mharding — Wed, 27 Jun 2012 13:23:53 GMT

Is the interface set to L3?

Do you get any link lights?

Re: cannot put a interface to work

luisneves — Wed, 27 Jun 2012 13:40:55 GMT

Yes, Yes, its green

Re: cannot put a interface to work

luisneves — Wed, 27 Jun 2012 14:13:33 GMT

I think I cannot use any interface to ping other hosts.

In the other PaloAlto I can ping whatever I need or whatever makes sense to ping to

Re: cannot put a interface to work

luisneves — Wed, 27 Jun 2012 14:43:04 GMT

Ive found it, it was a "ping" application rule blocking everything and I was searching for a "icmp" application rule

Thanks

Luis