topic QoS on aggregate interfaces in General Topics

QoS on aggregate interfaces

KatanaNZ — Thu, 11 Aug 2011 05:54:07 GMT

Hi All,

Are there any tricks to getting QoS enabled on Aggregate ports?

I have 8+VLANs running into two physical aggregate ports, that I want to enable QoS on.

Possible, or not?

Re: QoS on aggregate interfaces

jleung — Thu, 11 Aug 2011 14:54:04 GMT

Hi,

As you may know we don't support QoS on aggregate interface.

Which mode are you running the PA in? VWire? Routing L3 mode? If L3 modeis not a requirement, you can put our box as VWire intercepting all those physical connections created for aggregate interface. All the outside facing interfaces should be in the same zone,say untrust; and all the inside facing interfaces should be in the same zone too, say trust. Then PA will do content ID, APP Id and User ID based on the two zones- you don't need aggregate interfaces setup in PA, we just use multiple VWire to intercept all the physical connections and analyze the traffic at zone level.

Apply QoS on all egress interfaces.

Re: QoS on aggregate interfaces

proscar — Mon, 03 Sep 2012 20:37:30 GMT

Why is not supported QoS in aggregate interfaces, it's problem of software, in later version of PAN-OS maybe have support for QoS in aggregate interfaces or not?

Re: QoS on aggregate interfaces

sraghunandan — Mon, 03 Sep 2012 20:42:56 GMT

As of now we dont support QoS on aggregate interfaces , please contact your SE to know when and on which version this feature will be supported .

Thank you.

Re: QoS on aggregate interfaces

ben_tp_chan — Fri, 24 May 2013 04:30:39 GMT

Dear sraghunandan, Do you know which PAN-OS will support QoS on aggregate interface?

Re: QoS on aggregate interfaces

oschuler — Sat, 06 Jun 2015 14:59:46 GMT

According to release notes, PAN-OS 7.0 now supports QoS on aggregated interfaces.